Automatic Scratch Tester: ISO 1518-1 - Constant-loading

BGD 520-1

In stock

We will send you an order confirmation with the correct prices as soon as possible, so you can confirm these.

How it works?

1

Choose your products

2

Add to quote

3

Fill in your details

4

Request quote

Automatic Scratch Tester (ISO 1518-1: Constant-loading) 

Product Description

Coatings and paints can protect, decorate substrate or conceal the defects of substrate, and these three functions are related with coatings hardness. And hardness is the important performance for paint mechanical strength, as well as the important indicator to judge paint quality. One of important indicators to evaluate coatings hardness is scratch tester.

ISO 1518 (Paints and varnishes -- Determination of scratch resistance) specifies a test method for determining under defined conditions the resistance of a single coating or a multi-coat system of paint, varnish or related product to penetration by scratching with a scratch stylus loaded with a specified load. Penetration of the stylus is to the substrate, except in the case of a multi-coat system, in which case the stylus can penetrate either to the substrate or to an intermediate coat.

This test has been found to be useful in comparing the scratch resistance of different coatings. It is most useful in providing relative ratings for a series of coated panels exhibiting significant differences in scratch resistance. Before 2011, there was only one standard which was used to evaluate paint scratch resistance, which against to evaluate scientifically to paints scratch resistance under different applications. After revision of this standard in 2011, this test method was divided two parts: One is constant-loading, i.e the loading to panels is constant during the scratch test, and the test results is shown as max. weights which don't damage coatings. The other is variable loading, i.e. the loading on which stylus loads test panel is increased continuously from 0 during the whole test, then measure the distance from finial point to the other point when the paint appear scratch. Testing result is shown as critical loads.

  • Big working table can be moved left and rightconvenient for measuring different areas in the same panel
  • Special fixing device for sample---can test different size substrate
  • Sound-light Alarm system for puncturing through sample panel---more visual
  • High hardness material stylus--more durable

Standards

ASTM 1518-1: Constant Loading 

BS 3900 ; E2

Main Technical Parameters

More Information
Models
BGD 520/1 BGD 520/2
Technical Parameter 
Conform Standards ISO 1518-1     ISO 1518-2
BS 3900 ; E2
Stylus Hemispherical hard metal tip with radius of 0,5mm  Coned sapphire or diamond tip with radius of 0.03mm
Weight

                  Constant Loading                     

(0.5Nx2; 1Nx2; 2Nx1; 5Nx1; 10Nx1) 

             Variable Loading:             

(0g-50g; 0g-100g; 0g-200g)

Working Distance  120 mm 100 mm
Stylus Moving Speed 35±5mm/s 10±2mm/s
Angle between stylus and sample 90°
Motor 60W   220V  50Hz
Maximum panel size 200 x 100 mm
Maximum panel thickness Less than 1 mm Less than 12 mm
Dimensions (mm) 500x260x380 500x260x340
Weight 17 KG 17.5 KG