IBC Mixers (electrical)
The tote tank mixers CR-E are designed for operation on plastic containers with filling openings of 150 mm and volumes from 600 l up to 1,200 l. The customer may choose between various viscosity-related basic versions of fast-running and slow-running mixers with electric drives. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are balanced for concentric run after assembly.
The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator. The fixing of the traverse bridge is adjustable for various container models.
- The impellers are designed to fit through the filling opening 150 mm when being inserted.
- The electric container mixers are delivered with on-/off-switches with low-voltage breaker. The electric container mixers can also be supplied with frequency converter drives
Also available with ATEX Product Certificate (Directive 2014/34/EU).
Mixing Element 1
|Mixing Element 2|
|Product type [CR-E]||Capacity [l]||Viscosity [max. mPas]||Power [max. in kW]||Speed [approx. rpm]||Supply [V]||Shaft [d x Lmax in mm]||Diameter [mm]||Type||Diameter [mm]||Type|
|CR-E 4/0.75||650||500||0.75||1,500||230/400||20 x 800||125||Propeller||125||Propeller|
|CR-E 6/0.75||1,000||500||0.75||1,000||230/400||20 x 1,000||150||Propeller||150||Propeller|
|CR-E 200/0.75||650||2,000||0.75||200||230/400||30 x 800||350||Folding Propeller||140||Impeller for remainds|
|CR-E 200/0.75_2||1,000||2,000||0.75||200||230/400||30 x 1,000||350||Folding Propeller||140||Impeller for remains|
|CR-E 300/1.5||1,000||10,000||1.50||300||230/400||25 x 1,000||350||Folding Propeller||140||Impeller for remains|
Other solutions for this series upon request.