Wet Abrasion Scrub Tester (DIN EN 13300)

Product Description

Paint often becomes soiled especially near doorways, windows, and in work and play areas. Coated surfaces need to be tested for resistance to abrasion caused by a brush, sponge, or other means. The Wet Abrasion Scrub Tester can produce a repeatable, controlled condition to simulate everyday use or wear patterns.

BGD 526-6 Wet Abrasion Scrub Tester can examine washability and related properties that affect the stain resistance of coatings. Detergent performance testing can also be determined in a reproducible manner.

In accordance with standard DIN EN 13300 (replaces DIN 53778) 

• Running speed can be set to meet requirements of different standards.
• With four-digit counter, start the machine and it will automatically be stopped when reaching set times.
• Compatible with  abrasion pads to comply with different standard DIN EN 1300. (See ordering information for all other standards). 
• Quickly and easily to load and unload testing samples and replacing abrasion head.
• Can work normally under different voltages and frequencies
• With stable and uniform running speed because of Push-rod design
• Features two brush holders for side-by-side testing
• Long service life with hard and durable design
• The whole machine body is made of anodized aluminum, having stable working status, repeatable test results - no exception - even in the fastest speed of the stroke.
• With peristaltic pump design, accurate flow of control scrub medium.

Standards

• DIN EN 13300 (replaces DIN 53778)

Technical Specification

• Stroke Length: 300 mm
• Frequency of travel: 5~95 times/min (adjustable)
• Range of count:  0~9,999 times
• Size of test plate： 430×150×0.03mm
• Power of motor: 25W
• Power: 110V~220V ; 50/60 Hz
• Overall size:  500x460x280 mm
• Capacity of Water Container: 1L

Main Technical Parameters

Ordering Information:  

• BGD 526/1 - Wet Abrasion Scrub Tester (ASTM D 2486)
• BGD 526/2 - Wet Abrasion Scrub Tester (ISO 11998, does not include peristaltic pump)
• BGD 526/3 - Wet Abrasion Scrub Tester (ASTM D 3450)
• BGD 526/4 - Wet Abrasion Scrub Tester (ASTM D 4213)
• BGD 526/5 - Wet Abrasion Scrub Tester (ASTM D 4828)
• BGD 526/6 - Wet Abrasion Scrub Tester (DIN EN 13300)
• BGD 527 - Wet Abrasion Scrub Tester (ASTM D 2486 & ISO 11998)

Optional Accessories:

• BGD 1191 - Abrasion Heads for DIN EN 13300 Hog Bristle brush + Weights, total weigh is 250±10g, One pair
• BGD 1365/A - Hog Bristle Brush (1 pair)
• BGD 2208 - Black plastic panel  (432×165×0.25mm; pack of 100 pcs)