Formed Rods
A formed (threaded, grooved, etc.) rod is roll formed from a solid steel bar and closely resembles a wire wound rod. These rods are made by a precise mould, as well as implied with the cold extrusion technique to make the uneven wary curve on the its surface, which makes it has the same coating results as traditional wire bar coaters.
Features：
- Machined by CNC with precise mould, the deviation of groove depth and space is lower than 2 μm, which ensures a uniform film
- The service life will be longer without broken or loosen steel wires
- Smooth curving surface makes it easier to clean
- Ultra-thin coating films possible: min. 4 μm
Main Technical Parameters
|
Products Name |
Ordering Information |
Coating Width |
Rod Length |
The length of holding part |
Optional Wet Film Thickness（µm） |
|
Regular Formed Rods |
BGD 214 |
200mm |
240mm |
20mm/20mm |
6-8-10-12-15-20-25-30-40-50-60-80-100-120-150-200 |
|
Extended Formed Rods |
BGD 215 |
300mm |
400mm |
47mm/47mm |
Optional Accessories: BGD 1152 - holders (suitable for BGD 214)
