BBG 880-Series Salt spray cabinets with working room capacity of 108~800 liters. Maximum sample capacity (15cmx7cm) of 28~120pcs.
The salt spray test is a standardized test method used to check corrosion resistance of coated samples. Coatings provide corrosion resistance to metallic parts such as steel, zamak or brass. Since coatings can provide a high corrosion resistance through the intended life of the part in use, it is necessary to check corrosion resistance by other means. Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion.
Standards
ISO 4611, ISO 7253, ISO 9227, ASTM B117, ASTM B368, ASTM B380, ASTM G85-11, ASTM D 1735, DIN 50021
Technical Specification
Please download technical datasheet for detailed information
Main Technical Parameters
Temperatures: - Working Room Temperature Range:RT~50 °C - Humidifying Tower Temperature Range:RT~63 °C - Temperature Uniformity:= ±2 °C (No-load) - Temperature Stablility:= ±0.5 °C (No-load) - Temperature Devitation of Working Room: ±1.0 °C - Temperature Increasing Rate: RT upto 55 °C: less than 60 minutes (working room); RT upto 63°C less than 60 minutes (saturated barrel)
