DYNE Test Pens

Surface Tension Test Pens were introduced to provide accurate measurements of graduated surface tension levels. The fluid is applied to the surface or substrate until a satisfactory dyne level is found. Experience has shown that wetting is typically adequate when a continuous film of test fluid remains intact for 2 seconds. If the fluid breaks into droplets in less than 2 seconds, it indicates insufficient wetting, and a lower-numbered test fluid should be tried. If the fluid remains intact for longer than 2 seconds, a higher-numbered test fluid should be used.

These pens are widely used on materials such as PS, PE, PP, PET, PI, PC, NY, CPP, OPP, PVC, etc.

Solvica offers 16 different dyne value pens (30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 69 dyne). 

Please specify the desired value when ordering. Ordering Information:

- BGD 1146 - Surface Tension Test Pens (5ml)

- BGD 1147 - Surface Tension Test Pens (12ml)

- BGD 1148 - Surface Tension Test Pens (30ml)

- BGD 1149 - Surface Tension Test Pens (Rechargeable 60ml)