BGD 500/S automatical digital pull-off adhesion tester is a portable, hand-operated instrument which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strength of adhesion to the substrate.
It evaluates the adhesion (pull-off strength) of a coating by determining the greatest tensile pull-off force that it can bear before detaching. Breaking points, demonstrated by fractured surfaces, occur along the weakest plane within the system consisting of dolly, adhesive, coating layers and substrate.
Technical Specification
Portable design, can be used anywhere.
Built-in rechargeable lithium battery, no need any external power source.
Selectable directly four different sizes dolly for different resolution and testing range
Get the testing results from LCD directly.
Includes all tools needed for testing
Each PsiaTester’s pressure system is calibrated to within 1% accuracy by NIST traceable load cells
High-precise professional sensor ensures 0.01MPa resolution
Self-aligning dollies ensure to get a reliable testing results for smooth or uneven surfaces.
Supplied with calibration certificate
Stores all test results (includes Max. pull-off power,pull-off rate, dolly size and timer) automatically
Two units (MPa and psi) for selection and can be converted automatically.
No software required, the PsiATester also includes memory storage, when connecting the computer, the operator can read all data directly which is recorded during testing.
Showing pull-off rate allows users to monitor and adjust the pull speed according to different test requirements
Waterproof, dustproof and shockproof design meets any harshest operating environment
Strong plastic carrying case
Two year warranty
Main Technical Parameters
Dolly Size: 20mm (Standard); 10mm, 14 mm, 50mm (Optional)
Resolution: 0.01MPa (1psi)
Accuracy: ±1% Full scale
Max. Pull-off Pressure:
Φ 10mm dolly: 0-80MPa
Φ14mm dolly: 0-40MPa
Φ20mm dolly: 0-20MPa
Φ50mm dolly: 0-3.5MPa
Power: Built-in rechargeable lithium battery, and standard configuration charging adapter.
Adhesion Tester Size: 360mm×75mm×115mm (L x W x H)
Adhesion Tester Weight: 3KG
Packing List:
Adhesion Tester with digital display
20mm Aluminum test dollies (20 pcs)
Cutting toll for 20mm dollies
3M Adhesive and glue gun
Micro-USB cable
Operation Manual
Carrying case
Ordering Information:
BGD 500/S: Automatic Digital Pull-off Adhesion Tester
BGD 1520: 10mm Dolly (10 pcs/package)
BGD 1521: 14mm Dolly (10 pcs/package)
BGD 1522: 20mm Dolly (10 pcs/package)
BGD 1523: 50mm Dolly (10 pcs/package)
BGD 1524: Dolly-base for 50mm dollies
BGD 1525: Cutting Tool 50 mm (for 50mm dollies)
BGD 1526: Cutting Tool 20 mm (for 10mm, 14mm and 20mm dollies)