Keep your laboratory spraying area cleaner with the BGD 228 Benchtop Water-Curtain Spray Booth. Designed for small-scale applications, it combines effective overspray capture with a compact stainless steel enclosure. Straightforward operation and easy cleaning make it a practical addition to your laboratory
During spray application, not all paint adheres to the workpiece. Some becomes airborne as paint mist, or overspray, which can contaminate the surrounding air and pose a health risk to operators. The BGD 228 Benchtop Water-Curtain Spray Booth is designed for small-scale laboratory spraying applications, helping to capture overspray and maintain a cleaner working environment
The booth operates on the principle of negative pressure. During operation, suction creates a strong airflow through the passage beneath the water curtain, causing the water in this area to swirl and mix with the extracted paint mist. Paint particles are captured in the water, while the exhaust fan discharges the extracted air outdoors
Overspray is drawn towards the water curtain or into the water tank. The system achieves a high paint-mist collection efficiency. By capturing airborne paint particles, the booth helps keep the spraying area and workpieces clean
The booth features an all-stainless-steel enclosure and a centrifugal exhaust fan. Its compact footprint, straightforward operation and easy cleaning make it a practical solution for laboratory overspray control
Construction
Paint Mist Collection System
The paint mist collection system consists of a stainless steel water-curtain panel, a recirculating water tank and water baffles.
The water-curtain panel faces the operator and is made from 1.5 mm thick stainless steel. Water flows smoothly and continuously over its surface, forming an approximately 2 mm thick film.
Most of the overspray mixes with the water flowing down the panel and is carried into the recirculating water tank. A filter screen at the recirculation pump inlet captures paint residue before the water is recirculated.
Water Supply System
The water supply system consists of a recirculation pump, valves, a water-curtain overflow trough and connecting pipework.
Exhaust System
The exhaust system consists of a baffle-type air–water separator, a centrifugal exhaust fan, exhaust ducting and a fan mounting frame.
Located behind the water-curtain panel, the air–water separator features a labyrinth design that separates entrained water droplets from the extracted air. The collected water returns to the recirculating tank, helping to minimise water loss.
Main Technical Parameters
Overall dimensions: (L × W × H): 810 × 750 × 1,160 mm
Working chamber dimensions: (L × W × H): 600 × 500 × 600 mm
Exhaust air velocity: Approx. 12 m/s
Fan: Single-phase centrifugal fan, 370 W
Water curtain dimensions (L × W): 600 × 400 mm
Sample holder dimensions (L × W): 595 × 200 mm
Power supply: 220 V, 50 Hz
Air duct length: 2 m
Important: Non-ATEX version. Suitable only for spraying solvent-free, water-based coatings that do not create an explosive atmosphere under the conditions of use.