The wire and its rod form the wire-wound rods which are made of stainless steel, and therefore corrosion-resistant.
Application method: A coating (paint or ink) is being applied at a specified theoretical wet film thickness on a substrate (e.g. a Black/White test chart, glass or wood panel). The motion of the drawdown is carried out by gripping the 2 edges of the applicator, or by using a holder.
These applicators provide an economical way to assure the uniformity of thickness of very thin films.
Bar and wire manufactured of stainless steel
Perfect for very thin films, e. g. foils and paper coating tests
Ideal for flexible materials such as paper, cardboard, test charts, foils, leather, textiles, etc.
Maximum attainable wet film thickness engraved on bar end
Simultaneous drawdown of several samples side by side is possible
Technical Specification
Effective Wire-Wounding Length：200mm
Bar Total Length：240mm
Theoretical Wet Film Tickness Range: WFT range 6/8/10/12/15/20/30/40/50/60/80/100/120/150/200µm
Main Technical Parameters
Wet Film Thickness (μm)
BGD 212/6
6
BGD 212/8
8
BGD 212/10
10
BGD 212/12
12
BGD 212/15
15
BGD 212/20
20
BGD 212/25
25
BGD 212/30
30
BGD 212/40
40
BGD 212/50
50
BGD 212/60
60
BGD 212/80
80
BGD 212/100
100
BGD 212/120
120
BGD 212/150
150
BGD 212/200
200
Ordering information: BGD 212 + theoretical film thickeness
Optional: BGD 1152 Holder for wire bar models BGD 212 and BGD 214
