Cone & Plate Viscometer (750 rpm)

Product Description

BGD 159 series Cone and Plate Viscometers

Most of paint and coatings are non-Newtonian fluids, its viscosity would show typical changes when applied with roller, brush or spray gun under high shear rates. 

Our Cone and Plate Viscometers designed by ISO 2884, ASTM D 4287 and BS 3900, can offer from 10,000S^-1 to 12,000S^-1 shear rates.

Standards

ISO 2884, ASTM D 4287 and BS 3900

Technical Specification

• 7 inch touch screen with powerful userfriendly interactive interface and rich information, easy to operate
• Interchangeable cones, simple to install and easy to clean
• Choice of shear rate. Standard speeds include 750 and 900 rpm to provide shear rate at 10,000 sec^-1.
• Only need small sample amount（< 1 mL）, simplifies testing
• Built-in PT100 temp. probe
• ARM chip processor and Gigabit Ethernet port ensure higher data processing speed and rapid& stable data transfer
• New designed durable axle, anti-static shell and metal lifter
• Supplied with heating and temp. control system, can set sample plate temperature from -1°C to150°C or 5°C to 150°C
• Variety of viscosity units and auto switch between dynamic and kinematic viscosity
• Calibration by user：temperature and correction factor protected by password                       

How to select a suitable Viscometer?

1. Specify one speed or shear rate if this is required for your method.
2. Indicate viscosity range.
3. Select the temperature range that best suits your application:  -1°C to 150°C or 5°C to 150°C
4. Choose from 10 cones for multiple viscosity ranges

Main Technical Parameters