Each Solvica Hand Proofer mainly includes a rubber transfer roll and a spring-adjustable mechanically engraved anilox roll (Pyrimid type/surface is hard chrome plated). It gives customers more options - for testing ink on polyethylene, cellophane, glassine, metallic foils, plastic films, paper and paperboard. Moreover, what you see on the proof is what you’ll print on press. Since proofer rolls are available in a full range of screens to duplicate your press requirements, you can make any changes in ink or screen prior to the printing process.
Proofing Width: 70mm
Number of lines: 120 LPI (Lines Per Inch)
Technical Specification
Features:
Latest design, simple and easy to use, easy to clean
Perfect reproducibility of ink application and display of the ink density
The pressure between anilox roller with rubber roller is adjustable
Save ink and time before printing
How to perform the test:
Prepare a flat, clean sheet of the stock to be used
Adjust the anilox roller against the rubber roller by gradually turning the single vernier knob at the base of the hand proofer.
A spring mechanism inside the handle makes it simple to position the rollers to get just the right amount of pressure.
Put about 1/2 teaspoon of ink in the nip, rest the rubber roller on the stock, and draw the hand proofer toward you, smoothly and evenly.
What you see on the proof is what you'll get on your flexo press.
Main Technical Parameters
Line Screen Per Inch
(LPI)
Line Screen Per Centimeter
(LPC)
Volume
BCM/in2
Volume
cm2/m2
120
47.24
12.79
19.823
160
62.99
9.32
14.446
180
70.87
8.24
12.767
200
78.74
7.28
11.292
250
98.43
5.45
8.454
300
118.11
4.44
6.889
Note:
1. This table is only available for Pyramid type
2. For Line Screen: Divide Cell (LPI=Line Per Inch) count by 2.54 to get Lines per CM
3. For Volume: Multiply BCM (billion cubic micron per square inch) by 1.55 to get cm3/m2