BGD 212 Wire Bar Coaters: Width 200mm, Ø10mm
We will send you a price quotation with the correct prices as soon as possible, so you can confirm these.
BGD 212 Wire Bar Coaters
Product Description
The wire and its rod form the wire-wound rods which are made of stainless steel, and therefore corrosion-resistant.
Application method: A coating (paint or ink) is being applied at a specified theoretical wet film thickness on a substrate (e.g. a Black/White test chart, glass or wood panel). The motion of the drawdown is carried out by gripping the 2 edges of the applicator, or by using a holder.
These applicators provide an economical way to assure the uniformity of thickness of very thin films.
- Bar and wire manufactured of stainless steel
- Perfect for very thin films, e. g. foils and paper coating tests
- Ideal for flexible materials such as paper, cardboard, test charts, foils, leather, textiles, etc.
- Maximum attainable wet film thickness engraved on bar end
- Simultaneous drawdown of several samples side by side is possible
Technical Specification
Effective Wire-Wounding Length:200mm
Bar Total Length:240mm
Theoretical Wet Film Tickness Range: WFT range 6/8/10/12/15/20/30/40/50/60/80/100/120/150/200µm
Main Technical Parameters
Wet Film Thickness (μm) | |
BGD 212/6 | 6 |
BGD 212/8 | 8 |
BGD 212/10 | 10 |
BGD 212/12 | 12 |
BGD 212/15 | 15 |
BGD 212/20 | 20 |
BGD 212/25 | 25 |
BGD 212/30 | 30 |
BGD 212/40 | 40 |
BGD 212/50 | 50 |
BGD 212/60 | 60 |
BGD 212/80 | 80 |
BGD 212/100 | 100 |
BGD 212/120 | 120 |
BGD 212/150 | 150 |
BGD 212/200 | 200 |
Ordering information: BGD 212 + theoretical film thickeness
Optional: BGD 1152 Holder for wire bar models BGD 212 and BGD 214